Solution
Pre filtration polypropylene filter element
The F1P series ordinary grade filter element uses polypropylene filter material, which has wide chemical compatibility. The characteristics of high flow rate and high pollutant capacity make it the most economical pre filter element, and it is the best choice for removing high content large particles and high viscosity materials.
Category
Fine Chemicals
High purity chemical synthesis
Oil filtration
Accessories
Detail
The F1P series ordinary grade filter element uses polypropylene filter material, which has wide chemical compatibility. The characteristics of high flow rate and high pollutant capacity make it the most economical pre filter element, and it is the best choice for removing high content large particles and high viscosity materials.
Features and advantages
- High pollution capacity
- High flow rate
- Reliable particle interception efficiency
- Wide chemical compatibility
Typical Applications
- High pollution capacity
- High flow rate
- Reliable particle interception efficiency
- Wide chemical compatibility
biosafety
- Endotoxin: ＜ 0.25EU/ml
- Dissolved matter: ≤ 50mg/10 inches
filter area
- ≥0.41 m² /10”
Material structure
- Filter material: polypropylene filter membrane
- Center rod, outer frame, and end cover: polypropylene
- Diversion layer: polypropylene
- Gaskets and gaskets: silicone rubber, fluororubber, EPDM, wrapped with PTFE
Working characteristics
- B1: Ordinary polypropylene shell ＜ 60 ℃
- B2: Polypropylene shell+end lining ＜ 85 ℃
- B3: Polypropylene shell+full lining ＜ 95 ℃
- Forward withstand voltage of 4bar (23 ℃)
- Reverse withstand voltage of 2bar (23 ℃)
Filtering accuracy（ μ m）
- 0.1, 0.22, 0.45, 0.65, 1.0, 3.0, 5.0，10, 20
Filter Size
- Outer diameter: 68mm
- Length: 10 inches, 20 inches, 30 inches, 40 inches
Flow characteristics
Ordering information
|
F1P |
E |
0022 |
M3 |
10 |
E |
B1 |
||||||
|
|
code |
level |
code |
accuracy（μm） |
code |
interface |
code |
length（in） |
code |
sealing ring |
code |
skeleton |
|
|
B |
food |
0010 |
0.1 |
M1 |
222/FIN |
05 |
5 |
S |
silicon rubber |
B1 |
PP |
|
|
E |
electron |
0022 |
0.22 |
M2 |
222/Flat head |
10 |
10 |
E |
EPDM |
B2 |
High temperature resistance of joints |
|
|
P |
pharmacy |
0045 |
0.45 |
M3 |
226/FIN |
20 |
20 |
V |
VITON |
B3 |
Fully lined stainless steel |
|
|
C |
chemical industry |
0065 |
0.65 |
M4 |
226/Flat head |
30 |
30 |
T |
Outsourced Tetrafluoroethylene |
|
|
|
|
|
|
0100 |
1.0 |
M5 |
Flat compression |
40 |
40 |
|
|
|
|
|
|
|
|
0300 |
3.0 |
|
|
|
|
|
|
|
|
|
|
|
|
0500 |
5.0 |
|
|
|
|
|
|
|
|
|
|
|
|
1000 |
10 |
|
|
|
|
|
|
|
|
|
|
|
|
2000 |
20 |
|
|
|
|
|
|
|
|
Interface diagram
Previous
Previous
Recommended Products
Jiangsu Zhengmai Filtration Technology Co., Ltd. SEO 苏ICP备19050691号
Follow us
No. 11 Optical and electromechanical Park , No. 1692, Xinghu Avenue,Development Zone, Nantong, JiangSu Province, China.
