Solution
Polyethersulfone membrane filter element
The F1S series filter element is made of hydrophilic polyethersulfone membrane (PES) and PP skeleton, and the membrane material is made of imported asymmetric polyethersulfone membrane and imported non-woven fabric and silk mesh as the support layer. It has extremely low precipitation, good heat resistance, and can withstand multiple steam sterilization. Each filter element passes integrity testing before leaving the factory.
Category
Life sciences
Ferment
Pharmacy
Microelectronics
Chemical drug
Pharmaceuticals
Api
FPD flat panel display
Semiconductor Wafer
Electronic grade 18.2M Ω ultrapure water
Accessories
Detail
The F1S series filter element is made of hydrophilic polyethersulfone membrane (PES) and PP skeleton, and the membrane material is made of imported asymmetric polyethersulfone membrane and imported non-woven fabric and silk mesh as the support layer. It has extremely low precipitation, good heat resistance, and can withstand multiple steam sterilization. Each filter element passes integrity testing before leaving the factory.
Features and advantages
- Low precipitate
- Asymmetric membrane structure, endowing it with high pollutant absorption and long service life
- Good hydrophilicity, making the filtration of water-based materials smoother
- The filter element is prone to wetting and has a high pass rate for integrity testing
- Excellent heat resistance makes high-temperature sterilization operations safer and more effective
- Each filter element passes integrity testing before leaving the factory, making sterilization and filtration more secure.
Typical Applications
- Sterilization and filtration of large infusion (LVP) and small injection (SVP)
- Sterilization and filtration of beer and red wine
- Sterilization and filtration of freeze-dried powder injection
- Sterilization and filtration of mineral water and pure water
- Refinement and filtration of high-purity chemical reagents
- Sterilization and filtration of disinfectant
- Filtration of acid-base solution
- Filtering of inks and pigments
- Sterilization and filtration of purified water used in hospitals
Biosafety
- Endotoxin: ＜ 0.25EU/ml
- Dissolved matter: ≤ 50mg/10 inches
Filter area
- ≥0.6 m2 /10”
Material structure
- Filter material: single-layer hydrophilic polyethersulfone membrane
- Center rod, outer frame, and end cover: polypropylene
- Diversion layer: polypropylene
- Gaskets and gaskets: silicone rubber, fluororubber, EPDM, wrapped with PTFE
Working characteristics
- B1: Ordinary polypropylene shell ＜ 60 ℃
- B2: Polypropylene shell+end lining ＜ 85 ℃
- B3: Polypropylene shell+full lining ＜ 95 ℃
- Forward withstand voltage of 4bar (23 ℃)
- Reverse withstand voltage of 2bar (23 ℃)
- Steam sterilization at 123 ℃ @ 30min
Filtration（μm）
- 0.1，0.22，0.45，0.65，0.8，1.2，3.0, 5.0
Filter Size
- Outer diameter: 68mm/70mm
- Length: 10 inches, 20 inches, 30 inches, 40 inches
Integrity testing（Water@23℃）
Bubble point:
- 0.1μm≥3.8bar
- 0.22μm≥3.4bar
- 0.45μm≥2.3bar
Diffusion flow:
- ≤ 25ml/min.10 inches@2620mbar
Flow characteristics
Ordering information
|
F1S |
E |
0022 |
M3 |
10 |
E |
B1 |
||||||
|
|
code |
level |
code |
accuracy（μm） |
code |
interface |
code |
length（in） |
code |
sealing ring |
code |
skeleton |
|
|
B |
food |
0010 |
0.1 |
M1 |
222/FIN |
05 |
5 |
S |
silicon rubber |
B1 |
PP |
|
|
E |
electron |
0022 |
0.22 |
M2 |
222/Flat head |
10 |
10 |
E |
EPDM |
B2 |
High temperature resistance of joints |
|
|
P |
pharmacy |
0045 |
0.45 |
M3 |
226/FIN |
20 |
20 |
V |
VITON |
B3 |
Fully lined stainless steel |
|
|
C |
chemical industry |
0065 |
0.65 |
M4 |
226/Flat head |
30 |
30 |
T |
Outsourced Tetrafluoroethylene |
|
|
|
|
|
|
0080 |
0.8 |
M5 |
Flat compression |
40 |
40 |
|
|
|
|
|
|
|
|
0120 |
1.2 |
|
|
|
|
|
|
|
|
|
|
|
|
0300 |
3.0 |
|
|
|
|
|
|
|
|
|
|
|
|
0500 |
5.0 |
|
|
|
|
|
|
|
|
Interface diagram
Previous
Previous
Recommended Products
Jiangsu Zhengmai Filtration Technology Co., Ltd. SEO 苏ICP备19050691号
Follow us
No. 11 Optical and electromechanical Park , No. 1692, Xinghu Avenue,Development Zone, Nantong, JiangSu Province, China.
