Polyether Sulfone Filter Cartridge
The F3SV series filter element is made of hydrophilic polyethersulfone membrane (PES) imported from Germany, and adopts a special production process, making it suitable for filtering various high viscosity fluids, with low protein adsorption and large pollutant capacity. This filter element has good heat resistance and can withstand multiple steam sterilization. Each filter element passes integrity testing before leaving the factory.
Category
Folding filter element
Accessories
Detail
The F3SV series filter element is made of hydrophilic polyethersulfone membrane (PES) imported from Germany, and adopts a special production process, making it suitable for filtering various high viscosity fluids, with low protein adsorption and large pollutant capacity. This filter element has good heat resistance and can withstand multiple steam sterilization. Each filter element passes integrity testing before leaving the factory.
Features and advantages
- Special production process makes it more suitable for filtering high viscosity fluids
- Super large filtration area and long service life
- High pollution capacity
- Each filter element passes integrity testing before leaving the factory, making sterilization and filtration more secure.
Typical Applications
- Sterilization and filtration of high viscosity small injection (SVP)
- Filtration of large infusion fluids with high viscosity (hydroxyethyl starch sodium chloride injection)
- Filtering of Traditional Chinese Medicine Injections
- Filtration of blood products
- Filtration of photoresist and chemical reagents
biosafety
- Endotoxin: ＜ 0.25EU/ml
- Dissolved matter: ≤ 50mg/10 inches
filter area
- ≥0.6 m² /10”
Material structure
- Filter material: hydrophilic polyethersulfone membrane
- Center rod, outer frame, and end cover: polypropylene
- Diversion layer: polypropylene
- Gaskets and gaskets: silicone rubber, fluororubber, EPDM, wrapped with PTFE
Working characteristics
- B1: Ordinary polypropylene shell ＜ 60 ℃
- B2: Polypropylene shell+end lining ＜ 85 ℃
- B3: Polypropylene shell+full lining ＜ 95 ℃
- Forward withstand voltage of 4bar (23 ℃)
- Reverse withstand voltage of 2bar (23 ℃)
- Steam sterilization at 123 ℃ @ 30min
Filtration（μm）
- 0.1，0.22，0.45，0.65，0.8，1.2，3.0, 5.0
Filter Size
- Outer diameter: 68mm/70mm
- Length: 10 inches, 20 inches, 30 inches, 40 inches
Integrity testing（Water@23℃）
Bubble point:
- 0.1μm≥3.8bar
- 0.22μm≥3.4bar
- 0.45μm≥2.3bar
Flow characteristics
ordering information
|
F3SV |
E |
0022 |
M3 |
10 |
E |
B1 |
||||||
|
|
code |
level |
code |
accuracy（μm） |
code |
interface |
code |
length（in） |
code |
sealing ring |
code |
skeleton |
|
|
B |
food |
0010 |
0.1 |
M1 |
222/Fin |
05 |
5 |
S |
silicon rubber |
B1 |
PP |
|
|
E |
electron |
0022 |
0.22 |
M2 |
222/Flat head |
10 |
10 |
E |
EPDM |
B2 |
High temperature resistance of joints |
|
|
P |
pharmacy |
0045 |
0.45 |
M3 |
226/Fin |
20 |
20 |
V |
VITON |
B3 |
Fully lined stainless steel |
|
|
C |
chemical industry |
0065 |
0.65 |
M4 |
226/Flat head |
30 |
30 |
T |
Outsourced Tetrafluoroethylene |
|
|
|
|
|
|
0100 |
1.0 |
M5 |
Flat compression |
40 |
40 |
|
|
|
|
|
|
|
|
0300 |
3.0 |
|
|
|
|
|
|
|
|
|
|
|
|
0500 |
5.0 |
|
|
|
|
|
|
|
|
|
|
|
|
1000 |
10 |
|
|
|
|
|
|
|
|
|
|
|
|
2000 |
20 |
|
|
|
|
|
|
|
|
Interface diagram
Previous
Previous
Recommended products
Jiangsu Zhengmai Filtration Technology Co., Ltd. SEO 苏ICP备19050691号
Follow us
No. 11 Optical and electromechanical Park , No. 1692, Xinghu Avenue,Development Zone, Nantong, JiangSu Province, China.
