Polyether Sulfone Filter Cartridge
The F4SH series filter element is made of hydrophilic polyethersulfone membrane (PES) imported from Germany. The filter membrane has a highly asymmetric cross-sectional structure and adopts the unique manufacturing process of Zhengmai, which makes it have a filtration flux much higher than that of ordinary polyethersulfone membrane filter elements, high particle retention rate, and large pollutant capacity. This filter element has good heat resistance and can withstand multiple steam sterilization. Each filter element passes integrity testing before leaving the factory.
Category
Folding filter element
Accessories
Detail
The F4SH series filter element is made of hydrophilic polyethersulfone membrane (PES) imported from Germany. The filter membrane has a highly asymmetric cross-sectional structure and adopts the unique manufacturing process of Zhengmai, which makes it have a filtration flux much higher than that of ordinary polyethersulfone membrane filter elements, high particle retention rate, and large pollutant capacity. This filter element has good heat resistance and can withstand multiple steam sterilization. Each filter element passes integrity testing before leaving the factory.
Features and advantages
- Imported from Germany for high non pairing membrane formation, combined with special manufacturing processes, it has a filtration flux far greater than that of ordinary polyethersulfone filter cartridges
- Higher interception efficiency
- High pollution capacity
- Each filter element passes integrity testing before leaving the factory, making sterilization and filtration more secure.
Typical Applications
- Sterilization and filtration of large infusion fluids
- Filtering of injection water for bottle washing machines
- Filtration of mineral water
- Filtration of high-purity chemicals
- Filtering of beer and wine
- Filtration of Industrial High Purity Water
biosafety
- Endotoxin: ＜ 0.25EU/ml
- Dissolved matter: ≤ 50mg/10 inches
filter area
- ≥0.6 m² /10”
Material structure
- Filter material: hydrophilic polyethersulfone membrane
- Center rod, outer frame, and end cover: polypropylene
- Diversion layer: polypropylene
- Gaskets and gaskets: silicone rubber, fluororubber, EPDM, wrapped with PTFE
Working characteristics
- B1: Ordinary polypropylene shell ＜ 60 ℃
- B2: Polypropylene shell+end lining ＜ 85 ℃
- B3: Polypropylene shell+full lining ＜ 95 ℃
- Forward withstand voltage of 4bar (23 ℃)
- Reverse withstand voltage of 2bar (23 ℃)
- Steam sterilization at 123 ℃ @ 30min
Filtering accuracy（ μ m）
- 0.1，0.22，0.45，0.65，0.8，1.2，3.0, 5.0
Filter Size
- Outer diameter: 68mm/70mm
- Length: 10 inches, 20 inches, 30 inches, 40 inches
Integrity testing（ Water@23 ℃）
Bubble point:
- 0.1μm≥3.8bar
- 0.22μm≥3.4bar
- 0.45μm≥2.3bar
Flow characteristics
Ordering information
|
F3SV |
E |
0022 |
M3 |
10 |
E |
B1 |
||||||
|
|
code |
level |
code |
accuracy（μm） |
code |
interface |
code |
length（in） |
code |
sealing ring |
code |
skeleton |
|
|
B |
food |
0010 |
0.1 |
M1 |
222/FIN |
05 |
5 |
S |
silicon rubber |
B1 |
PP |
|
|
E |
electron |
0022 |
0.22 |
M2 |
222/Flat head |
10 |
10 |
E |
EPDM |
B2 |
High temperature resistance of joints |
|
|
P |
pharmacy |
0045 |
0.45 |
M3 |
226/FIN |
20 |
20 |
V |
VITON |
B3 |
Fully lined stainless steel |
|
|
C |
chemical industry |
0065 |
0.65 |
M4 |
226/Flat head |
30 |
30 |
T |
Outsourced Tetrafluoroethylene |
|
|
|
|
|
|
0100 |
1.0 |
M5 |
Flat compression |
40 |
40 |
|
|
|
|
|
|
|
|
0300 |
3.0 |
|
|
|
|
|
|
|
|
|
|
|
|
0500 |
5.0 |
|
|
|
|
|
|
|
|
|
|
|
|
1000 |
10 |
|
|
|
|
|
|
|
|
|
|
|
|
2000 |
20 |
|
|
|
|
|
|
|
|
Interface diagram
Previous
Previous
Next
Recommended products
Jiangsu Zhengmai Filtration Technology Co., Ltd. SEO 苏ICP备19050691号
Follow us
No. 11 Optical and electromechanical Park , No. 1692, Xinghu Avenue,Development Zone, Nantong, JiangSu Province, China.
