Nylon filter element
The Zhengmai F1N series filter element is made of hydrophilic nylon membrane, which has high throughput, high flow rate, and low adsorption performance. Before leaving the factory, each filter element has undergone integrity testing to ensure the high quality of the product, which is widely used in the fields of pharmaceuticals, chemicals, and microelectronics.
Category
Folding filter element
Accessories
Detail
The Zhengmai F1N series filter element is made of hydrophilic nylon membrane, which has high throughput, high flow rate, and low adsorption performance. Before leaving the factory, each filter element has undergone integrity testing to ensure the high quality of the product, which is widely used in the fields of pharmaceuticals, chemicals, and microelectronics.
Features and advantages
- High cost-effectiveness
- Natural hydrophilicity
- Resistance to organic solvents
- Each filter element has undergone integrity testing
Typical Applications
- Sterilization and filtration of large infusion, small injection, and antibiotics
- Diagnostic reagent filtration
- Purified water and injection water terminal sterilization and filtration
- Filtration of medical water
- Electronic Industry Water Filtration
- Filtering of positively charged photosensitive corrosion inhibitors
biosafety
- Endotoxin: ＜ 0.25EU/ml
- Dissolved matter: ≤ 50mg/10 inches
filter area
- ≥0.62 m² /10”
Material structure
- Filter material: nylon membrane
- Center rod, outer frame, and end cover: polypropylene
- Diversion layer: polypropylene
- Gaskets and gaskets: silicone rubber, fluororubber, EPDM, wrapped with PTFE
Working characteristics
- B1: Ordinary polypropylene shell ＜ 60 ℃
- B2: Polypropylene shell+end lining ＜ 85 ℃
- B3: Polypropylene shell+full lining ＜ 95 ℃
- Forward withstand voltage of 4bar (23 ℃)
- Reverse withstand voltage of 2bar (23 ℃)
- Steam sterilization at 123 ℃ @ 30min
Filtering accuracy（ μ m）
- 0.1，0.22，0.45， 1.0，3.0, 5.0
Filter Size
- Outer diameter: 68mm
- Length: 10 inches, 20 inches, 30 inches, 40 inches
Integrity testing
- Bubbling point（ Water@23 ℃）
- 0.22μm≥2.8bar
Flow characteristics
ordering information
|
F1N |
E |
0022 |
M3 |
10 |
E |
B1 |
||||||
|
|
code |
level |
code |
accuracy（μm） |
code |
interface |
code |
length（in） |
code |
sealing ring |
code |
skeleton |
|
|
B |
food |
0010 |
0.1 |
M1 |
222/FIN |
05 |
5 |
S |
silicon rubber |
B1 |
PP |
|
|
E |
electron |
0022 |
0.22 |
M2 |
222/Flat head |
10 |
10 |
E |
EPDM |
B2 |
High temperature resistance of joints |
|
|
P |
pharmacy |
0045 |
0.45 |
M3 |
226/FIN |
20 |
20 |
V |
VITON |
B3 |
Fully lined stainless steel |
|
|
C |
chemical industry |
0100 |
1.0 |
M4 |
226/Flat head |
30 |
30 |
T |
Outsourced Tetrafluoroethylene |
|
|
|
|
|
|
0300 |
3.0 |
M5 |
Flat compression |
40 |
40 |
|
|
|
|
|
|
|
|
0500 |
5.0 |
|
|
|
|
|
|
|
|
Interface diagram
Previous
Previous
Recommended products
Jiangsu Zhengmai Filtration Technology Co., Ltd. SEO 苏ICP备19050691号
Follow us
No. 11 Optical and electromechanical Park , No. 1692, Xinghu Avenue,Development Zone, Nantong, JiangSu Province, China.
