Ethylene membrane filter element
The Zhengmai F2VL series filter element is made of hydrophilic polyvinylidene fluoride membrane, which has high throughput and flow rate. The integrity test before leaving the factory ensures the high quality of the product. The low protein adsorption performance of PVDF membrane makes the filter element suitable for sterilization and filtration of various biological products. At the same time, the hydrophilicity makes the filter element suitable for direct filtration without the need for early wetting with organic solvents, greatly improving the convenience of use.
Category
Folding filter element
Accessories
Detail
The Zhengmai F2VL series filter element is made of hydrophilic polyvinylidene fluoride membrane, which has high throughput and flow rate. The integrity test before leaving the factory ensures the high quality of the product. The low protein adsorption performance of PVDF membrane makes the filter element suitable for sterilization and filtration of various biological products. At the same time, the hydrophilicity makes the filter element suitable for direct filtration without the need for early wetting with organic solvents, greatly improving the convenience of use.
Features and advantages
- Hydrophilicity, can be directly filtered without prior wetting
- Wide chemical compatibility
- Low precipitate
- High pollution capacity
- Ultra low protein adsorption capacity
- Each filter element passes integrity testing before leaving the factory, making sterilization and filtration more secure.
Typical Applications
- Sterilization and filtration of large infusion and small injection
- Sterilization and filtration of antibody drugs
- Diagnostic reagent filtration
- Filtering of electronic industry chips such as grinding fluid
- Filtering of Special Ink
- Filtration of pure draught beer
biosafety
- Endotoxin: ＜ 0.25EU/ml
- Dissolved matter: ≤ 50mg/10 inches
filter area
- ≥0.62 m² /10”
Material structure
- Filter material: hydrophilic polyvinylidene fluoride membrane
- Center rod, outer frame, and end cover: polypropylene
- Diversion layer: polypropylene
- Gaskets and gaskets: silicone rubber, fluororubber, EPDM, wrapped with PTFE
Working characteristics
- B1: Ordinary polypropylene shell ＜ 60 ℃
- B2: Polypropylene shell+end lining ＜ 85 ℃
- B3: Polypropylene shell+full lining ＜ 95 ℃
- Forward withstand voltage of 4bar (23 ℃)
- Reverse withstand voltage of 2bar (23 ℃)
- Steam sterilization at 123 ℃ @ 30min
Filtering accuracy（ μ m）
- 0.1，0.22，0.45， 1.0，3.0, 5.0
Filter Size
- Outer diameter: 68mm
- Length: 10 inches, 20 inches, 30 inches, 40 inches
Integrity testing
- Foaming point (ethanol ≥ 95% @ 23 ℃)
- zero point two two μ m≥2.4bar
Flow characteristics
ordering information
|
F2VL |
E |
0022 |
M3 |
10 |
E |
B1 |
||||||
|
|
code |
level |
code |
accuracy（μm） |
code |
interface |
code |
length（in） |
code |
sealing ring |
code |
skeleton |
|
|
B |
food |
0010 |
0.1 |
M1 |
222/FIN |
05 |
5 |
S |
silicon rubber |
B1 |
PP |
|
|
E |
electron |
0022 |
0.22 |
M2 |
222/Flat head |
10 |
10 |
E |
EPDM |
B2 |
High temperature resistance of joints |
|
|
P |
pharmacy |
0045 |
0.45 |
M3 |
226/FIN |
20 |
20 |
V |
VITON |
B3 |
Fully lined stainless steel |
|
|
C |
chemical industry |
0100 |
1.0 |
M4 |
226/Flat head |
30 |
30 |
T |
Outsourced Tetrafluoroethylene |
|
|
|
|
|
|
0300 |
3.0 |
M5 |
Flat compression |
40 |
40 |
|
|
|
|
|
|
|
|
0500 |
5.0 |
|
|
|
|
|
|
|
|
Interface diagram
Previous
Previous
Recommended products
Jiangsu Zhengmai Filtration Technology Co., Ltd. SEO 苏ICP备19050691号
Follow us
No. 11 Optical and electromechanical Park , No. 1692, Xinghu Avenue,Development Zone, Nantong, JiangSu Province, China.
